 |
Media
Converter
Copper-to-fiber media converters
provide a transparent Ethernet link between copper
medium and fiber-optic medium. They convert and forward
Ethernet frames from electrical signals to fiber signals
or vice versa. The widest portfolio provides various
different options for carriers to choose the most
suitable for their networks, different speeds, different
fibers, and different transmission distances.
Ethernet Demarcation Device
Raisecom's innovative RC581 series
media converter has beyond the boundaries of traditional
dumb media converters by integrating Layer 3 protocol
stacks. It provides a clear demarcation point between
carriers's and users's networks by assigning a management
IP address for carriers's management IP purpose. Particularly,
its innovative user network diagnostic functions allow
carriers to assign the second IP address, which is
used to communicate and diagnostic the user's network.
Ethernet Switch
Raisecom series switches are L2 wire-speed
Ethernet switches to fully meet the demands of carriers's
access network. Sufficient VLAN allocation, flexible
bandwidth control, complete network management, various
ranks of Qos and access control function are support
to provide ideal access layer multiple services while
holding a competitive price which may significantly
improves carriers's solution and product competitiveness.
Ethernet over E1/E3/DS3 (PDH)
Ethernet-over-PDH is a collection
of technologies and standards that allow the transport
of native Ethernet frames over the well-established
PDH telecommunications infrastructure. This enables
carriers to make use of the extensive network of legacy
PDH and SDH equipment to provide new Ethernet-centric
services.
Ethernet
over SDH
Next
generation Ethernet over SDH terminal multiplexer,
which provides an easy, efficient and cost-effective
bridging of Ethernet services over SDH networks.
G.SHDSL Modem
SHDSL (ITU G.991.2) is a standard
DSL technology that fulfills the broadband requirements
of business users for symmetrical and two-way traffic,
opening the door for service providers to deliver
low cost, multiservice, broadband access to a wider
subscriber base.
Multiservice STM-1 CPE
Compactness, cost-efficiency and versatility highlight
the OPCOM3100-155 and OPCOM3101-155, they are carrier-class
design 1U STM-1 Multiplexer, which is good suited
for transmit voice or data. OPCOM3100 and OPCOM3101
can be configured as a Terminal Multiplexer or Add/Drop
Multiplexer. Point-to-point, chain and ring topology
is available.
Multiservice Access Platform
The
carrier-class compact design, the powerful interfacing
capabilities and the rich mounting options open up
a whole new area of application for OPCOM3500. OPCOM3500
is carrier-class Multi-Service Provisioning Platform,
and designed to enable establishment of service-integrated,
it can deliver a mix of voice and high-speed data
service.
Fiber
Optical Multiplexer (PDH)
Fiber Optical Multiplexer is a PDH
transmission device of E1, V.35, and Ethernet services
over fiber for point-to-point networks, medium-sized
and small capacity networks, such as communication
of BTS, private voice and broadband data networks,
dedicated services networks, and PSTN networks.
DS3/E3 Fiber Modem
The RC802-DS3/E3 is a Fiber Optical
Modem that extends the transmission range of DS3 and
E3 over fiber optic cables.
PCM Equipment
Pulse
Code Modulation Multiplexer provides voice and N*64Kbps
data services over E1 copper links or PDH fiber optical
links, based on non-blocking DS0 cross-connect.
Interface Converter
Raisecom interface converters are the device of data
interface over TDM traffic. They are based on network
transmission to provide Nx64Kbps data service access.
CWDM
Raisecom
Coarse Wavelength Division Multiplexer (CWDM) transmission
platform presents carriers with a cost-effective,
flexible and scalable way to selectively increase
the utilization of existing fiber assets to quickly
deploy additional bandwidth and services at a fraction
of the investment required to deploy new fiber.
Network Management System
Raisecom NView NNM (Network Node
Management) is a new generation of comprehensive network
management system which provides centralized management
over network element layer.
Chassis
Cost-effective chassis with optional
network management agent module to realize centralize
or remote management of modular type device.
SFP
Modules
Small Form-factor Pluggable (SFP) modules are compact
optical transceivers used in optical communications
which provide the same functionality as a regular
GBIC, but in a much smaller and denser physical size.
Highlighted for the confirmation to standardized physical
and electrical characteristics, the deployment of
SFP modules makes carriers' inventory investment much
smaller for there is no vendor limitation.
Optical Coupler/Splitter
Optical Splitter is passive optical
device that connects three or more fiber ends, dividing
one input between two or more outputs, or combining
two or more inputs into one output.Optical splitter
is generally deployed in passive optical network,
giving carriers the ability to split optical signals
to multiple customer premises, enabling the connection
of multiple branch optical fibers in case that
one trunk optical fiber was applied.
Video over Fiber Optical Multiplexer
RCVS series video fiber optical
multiplexer provides ideal solution for transmitting
from 1 to 64 channels of video surveillance signals
and control signals over fiber optic cables.
Voice over Fiber Optical Multiplexer
RC3101/3102 and RC3201/3202 series
equipment provides up to 16 channels of POTS and data
services, including FXS/FXO/V.35/Ethernet over E1
circuits or fiber optic cables.
GEPON
Raisecom developed GEPON system consists
of OLT and ONU equipment. By deploying OLT at central
office and ONU at customer premise sites, GEPON system
provides Ethernet access for up to 3072 subscribers
with Ethernet funcationalities. This is an ideal solution
for competitive carriers and metro Ethernet carriers
to construct Next Generation Networks and provide
Triple-play or Multiple-play services.
Microwave
PDH/SDH
Raisecom¡¯s Microwave Radio Systems provides integrated digital microwave communications system solutions. This product line includes small capacity MW-PDH digital microwave and large capacity MW-SDH digital microwave, and the transmission line with the antenna systems, and digital multiplexer. This microwave radio system is an ideal approach of deploying TDM transportation network infrastructure, especially in mountainous areas where it is difficult to lay coppers and fibers
|
|
|
| Applications |
![]()
|
| Download |
|
| Tips |
For
more information about RAISECOM's
products, please contact
86-10-82883305
export@raisecom.com
|
|
